User's Manual

Wireless Office Keyboard And Mouse
15
About the function
This function will be changed when the status alter, as below:
status “ON”→ When you press the
key, you can input the “€”.
status “OFF”→You can change the “Num Lock” status.
3. Setting Wireless Office keyboard and Program
A. Make sure the receiver cable (purple) is plugged into the PS/2
keyboard port and the other cable (green) is plugged into the PS/2
mouse port.
B. Establish communication between the receiver and keyboard. The
bottom of the receiver has a channel switch. The bottom of the
keyboard also has a channel switch. When the receiver’s switch
setting on CH1, then the keyboard and mouse’s channel switch
should be setting on CH1 (The channel default setting is on CH1).
See the photograph below. If the keyboard and mouse setting
different channel with receiver, then they won’t work normally.
Receiver ID Setting Button
Receiver Channel Switch