User's Manual
IVTSoftware:
1. Press the ‘Conn’ button at bottom of the Bluetooth keypad, then the led will start flashing.
2. Double click the BT icon on the system tray and it wills pop-up a windows. Choose “My
Bluetooth”
→ ” Bluetooth Device Discovery”
3. It will find the “Keypad” device. Right click on the keypad icon and choose “”Connect”
→ ”
Bluetooth Human Interface Device Service”
4. Just follow the screen display to input the Passkey then press “enter” (the keypads enter).
5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No
other steps are necessary.
6. The Bluetooth icon will become to . The Bluetooth keypad is ready to use.