Bluetooth Music Receiver User’s Manual BMR-300 Version 1.
About This Manual This manual is designed to assist you in installing and using the Bluetooth music receiver Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2013 This document contains proprietary information protected by copyright. All rights are reserved.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT This Equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Introduction Thank you for purchasing the Bluetooth music receiver. This User’s Manual contains information that will help to operate the device as well as answering possible questions. Please keep this manual in a safe place for future reference. Available Devices NFC Smart Phones with Android OS 4.0 or higher i Phone, i Pad, i Pod Compatible with all devices enabled with A2DP stereo Bluetooth® Features: Single-chip Bluetooth 3.0 transceiver supporting Bluetooth2.1 and Bluetooth 2.0, 1.
Connect Power Micro USB Cable to Bluetooth music receiver Connect Audio Cable to the Stereo device Press ID button to turn the power on For pairing process, please refer to below methods Wiring Diagram: Audio Cable 5V/1A Adaptor NFC induction area ID button LED indicator Operation Description
Function Function Key Operation Name Blue LED Indicate Description Power ON LED flashes Press ID button for 1 (re-establish the BMR-300 Power on second then release 4 times Press the ID button for 5 LED flashes connection) Power Off BMR-300 Power off 4 times seconds then release 1. Press the ID button Pairing for 3 seconds then BMR-300 in paring release mode LED flashes every 0.5 seconds 2. NFC Auto Pairing Switch between Play and Pause.
NFC Bluetooth Pairing Method NFC tag distance up to 1 cm 1. 2. 3. 4. Turn on the NFC function from Smartphone Put the Smartphone near the Bluetooth music receiver The device” Bluetooth Stereo Audio” displays on Smartphone and choose “Connect” Start to play music from Smartphone after completing the connection Bluetooth Pairing Method (Smartphone w/o NFC) 1. Turn on the Bluetooth from Smartphone 2. Pressing the ID button for 3 seconds then release (Please make sure the blue LED is turn on) 3.
When product is in use: When there's an incoming call, the music will stop. After the call, the music will resume automatically.
