Assembly Instructions

Step 4
Step 5
Stand the Chaise Lounge up.
Place the Chaise Lounge on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully sit onto the Chaise Lounge.
This will help to align all parts at all joints.Then get off the Chaise Lounge, and in a
sequential manner, proceed to tighten all Bolts. When tightening the Bolts, tighten
sequentially.
DO NOT tighten any Bolt fully and then move on to the next one.
This may cause the frame to warp.
If there are still wobbles, loosen the Bolts and execute this same process.
Note: This step is done best with the assistance of a second adult.
Your Chaise Lounge is ready for use.
This Chaise Lounge can only be used on a flat, level surface.
4.1) Insert Leg(B) into Seat Panel(A) and Leg Rails(C) as pictured.
4.2) Attach Leg(B) to Seat Panel(A) using Bolts(①) with Allen Key(③) as shown above.
4.3) Attach Leg(B) to Seat Panel(A) using Bolts(②) with Allen Key(③) as shown above.
4.4) Attach the Leg Rails(C) to Leg(B) using Bolts(①) with Allen Key(③) as shown above.
Do not fully tighten the Bolts.
Step 4.1
Step 4.2
Step 4.3
Step 4.3
Step 4.4
Page 4 OF 5