Installation & Assembly

Step 1
Determine the ideal location of your new vanity.
Mark the holes and drill pilot holes in the dry wall.
1
Step 2
Place the vanity frame on the finished wall and install
at the locations drilled with the screws shown in Figure 2:
The long nylon raw for the long screw with nylon washer
and metal washer and fix with acorn nut.
The short nylon raw for the short screw.
2
0,31 in
0,31 in
0,4 in
0,4 in
11,8in
3
Step 3
Fix legs on cabinet using the supplied screws.