Features: Fully finished interiors Includes installation hardware Micro-Density Fiberboard (MDF) construction PVC finish resists moisture and scratches Side view for plumbing Back view for plumbing 22,1 4 4,7 17,2 Wall 22 4 9,9 10,5 24 18 33,8 4 9 17,2 Wall 22 4 9,9 10,5 35 18 45,5 4 10,7 Wall 22 18 4 10,7 10,5 9,9 47 7,9 - 11,8 31,9 17,7 22,8 4,7 19,6
36 22 24 48 18 35 22 22 Basins available: - ceramic 18 24 18 47 Cabinet in MDF, sides thickness 0,63in, doors thickness 0,75in coated in PVC 0,01in waterproof and scratchproof that guarantee long life and reliability. Cabinet with folding frame Matt White. Opening type constituted by a milling throat. Drawers and foors available in relief finish. Blum push slides guaranteed for 60.000 cycles and allow the adjustment in 2 different positions.
Installation notes: Install this product according to the installation guide Special site preparation is required. Wall bracing supplied hardware are recommended. The plumbing must be roughed into the plumbing cutout area of the vanity. Refer to the sink rough-in and the vanity rough-in for proper placement. The water supply and drain lines must be installed before installing the vanity.
Step 1 Determine the ideal location of your new vanity. Mark the holes and drill pilot holes in the dry wall. 1 11,8in 0,4 in 0,4 in 0,31 in 0,31 in Step 2 Place the vanity frame on the finished wall and install at the locations drilled with the screws shown in Figure 2: 2 The long nylon raw for the long screw with nylon washer and metal washer and fix with acorn nut. The short nylon raw for the short screw. Step 3 Fix legs on cabinet using the supplied screws.
Installation notes: Faucet and silicone are not included. All sizes are subject to tolerance. Sink assembly Install the faucet to the top and drains to the sink. Refer to the faucet and drain manufacturer’s instructions. Complete the faucet connections. Run water and check for leaks. Apply a bead of silicone behind the top surface to the finished wall.
