Installation Guide

Attach mounting bracket (A) to outlet box
with outlet screws (B).
Step 2. Connect Wires
Step 1. Install Mounting Plate
B
Outlet
Screw
Mounting
Bracket
A
Supply Wires:
Ground Wires:
Connect Black (Line Wire) from fixture to Black (Hot Wire)
from outlet box.
Connect White (Neutral Wire) from fixture to White (Neutral
Wire) from outlet box.
Connect Green (Ground Wire) from fixture to Green or Bare
Copper (Ground Wire) from outlet box.
Twist wires together clockwise and secure with wire
connector (C).
Installer Tip (1): If ground wire is not available in outlet box,
then secure Bare Copper (Ground Wire) from fixture to
ground screw (D) on mounting plate (A).
Installer Tip (2): Supply wires can be either tucked into
outlet box or fixture canopy.
Bare Copper
(Ground Wire)
White
(Neutral Wire)
Black
(Line Wire)
Ground
Screw
D
Mounting
Bracket
A
C
Wire
Connector