Installation & Assembly

Page 2 of 2
STEP 1:
Please put the Barstool Body (1) on a carpeted or padded area.
Place Bottom Stretcher (2) to Barstool Body (1) as shown.
Insert 4 pieces of Bolt (A) from the pre-drilled holes at Bottom Stretcher (2) into the pre-drilled holes at leg posts
on Barstool Body (1).
Insert 2 pieces of Bolt (A) from the pre-drilled holes at Bottom Stretcher (2) into the pre-drilled holes at front stretcher
on Barstool Body (1).
Use Allen Wrench (B) to tighten all Bolts (A) clockwise until secure.
Ax6 Bx1
Hardware & Tool required
STEP 2:
Assembly is completed. The barstool is ready to enjoy now!
Carefully place the barstool at your desired position.
1
A
1
2
A
1
2
B
A
B
2
A
ARM BARSTOOL