Installation Guide

2of2
STEP 4 - Install the Fixture Body
A. Place the ceiling canopy of the Fixture Body (B) onto the nipple and
secure with previously removed mounting ball. Hand tighten until
snug.
Nipple
Mounting Ball
B
Figure 4
STEP 5 - Install Bulbs and Glass Shades
A. Unlock the coupling so that the bobeche can be moved.
B. Insert bulbs onto socket and screw snugly into place.
C. Place the Glass Shade (C) over sockets and place the glass holder
inside of the Glass Shade (C).
D. Tighten the coupling to engage the Glass Shade (C) between the
bobeche and the glass holder.
Your fixture is now assembled and ready to use. Enjoy!
C
Socket
T8 Vintage Bulb
(recommended
but not included)
Bobeche
Glass Holder
Coupling
Figure 5
FINISH: EARTH BLACK
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
17”
11.5”
5.5”
10.25”
5”
17”
6” Dia.