Owner Manual

6
TROUBLESHOOTING
Canopy
Screw
x 2
CC
Hardware Used
5. Pass canopy (A) over the arms protruding from
the mounting bracket (B) and secure with
canopy screws (CC).
CARE AND MAINTENANCE
Fixture does not light. 1. Fixture may be wired incorrectly.
1. Check wiring.
1. Check wiring.
PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION
ASSEMBLY INSTRUCTIONS
6. Screw shade (D) onto LED assembly (C).
Repeat for remaining shades (D).
6
C
D
• Always be certain that electric current is turned off before cleaning this item.
• Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on
fixture, as it will damage the metal finish.
• All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not
wash shades in an automatic dishwasher.
A
5
B
CC