Installation & Assembly

LED ILLUMINATED ALUMINIUM CABINETS
Installation Instructions
Diagram B
Diagram A
Sperry
700
600
Diagram C
Diagram D
B
D-1
D-2
D-2
1. Remove the packaging taking special care with the
doors and separate shelves. Open the cabinet doors
and remove the screws on the doors. Take care not to lose the screws.
6. Before making
any electrical con
the main electricity sup
a supply cable already
fitted. This cable should be ftted to the household lighting
Connections should
This
requires an
earth connection.
7. When the cabinet is fully secure the internal top cover
should be closed and secured with the small screws
removed earlier. When the cover is closed and secure
restore the
main power and test the function of the lights and
the shaver socket. If the light fails to function properly it is likely
the IR sensor has been positioned too close to an adjacent wall
or reflective surface
G
Release Lever
C
D
2.
Measure the length,width,depth of back of cabinet for recess ( see diagram A )
4.
Open the electronic cover to fix the screws after cabinet installed on proper position. ( See Diagram C )
nections it is necessary to turn off
circuit or to a fused
be made in accordance with the latest regulations.
3.
Release the hinges by pressing the bottom of hinges to remove the doors ( see diagram B )
5.
Install the cabinet door after screws fixed. Make sure the hinge hook was fully inserted into the holes ( see diagram D-1 )
Press the hinge body to be fixed with hinge base ( see diagram D-2)
ply. This unit is provided with
3 AMP supply.
cabinet is manufactured to CLASS 1 and
OPERATING INSTRUCTIONS
Light can be controlled by using the rocker switch on right bottom side of cabinet