2 pg_W-272_EFS 5/14/06 3:42 PM Page 1 Owner’s Manual Guide d’utilisation Manual del Usuario Indoor Lighting Fixture Installation Instructions Instructions d'installation Appareil d'éclairage pour utilisation intérieure Instrucciones para la insalación de la lámpara para interiores Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:
12 pg_W-272_EFS 5/14/06 3:42 PM Page 2 ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE Congratulations on your purchase. This fixture has been designed to give you many years of beauty and service. NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1). WARRANTY INFORMATION WARNING ELECTRICAL SHOCK CAN RESULT IN SERIOUS INJURY. Read and follow instructions exactly as shown. If instructions are unclear, do not proceed.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 3 FIGURE 1. *OUTLET BOX (D) *OUTLET BOX SCREWS (E) LOCK WASHER 1 (H1) HEX NUT 1 (F1) GROUND WIRE SIDE HOLE (K) MOUNTING NIPPLE (L) BACK SOCKET NIPPLE (G) HEX NUT 2 (F2) LOCK WASHER 2 (H2) HEX NUT 3 (F3) FRONT SOCKET NIPPLE (P) RUBBER WASHER (O) MOUNTING BAR (C) WIRE CONNECTORS (I) GREEN GROUNDING SCREW (J) BACK PLATE (B) KNOB NUT (M) SOCKET (Q) CAP NUT (A) DIFFUSER (N) Line art shown may not exactly match the fixture enclosed.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 4 MOUNTING AND WIRING INSTRUCTIONS NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Secure mounting bar (C) to outlet box (D) with outlet box screws (E) (not included) (see fig. 1). 3.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 5 LES INSTRUCTIONS D'ASSEMBLAGE DE L'APPAREIL D'ÉCLAIRAGE POUR UTILISATION INTÉRIEURE Félicitations ! Vous avez acheté un produit. Cet appareil d'éclairage a été conçu pour durer de nombreuses années. NOTA : Déballez soigneusement l'appareil d'éclairage et les pièces. Assurez-vous que toutes les pièces y sont avant de mettre l’emballage au rebut (voir fig. 1). GARANTIE LIMITÉE MISE EN GARDE: L'ÉLECTROCUTION POURRAIT CAUSER DE GRAVES BLESSURES PERSONNELLES.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 6 FIGURE 1.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 7 INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENT NOTA : Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. 1. Mettez l’interrupteur de la boîte de fusibles à « OFF » afin d’éviter le risque d’électrocution. 2.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 8 INSTRUCCIONES DE MONTAJE PARA EL ARTEFACTO DE ILUMINACIÓN PARA INTERIORES Le felicitamos por comprar este producto. Este producto ha sido diseña- do para brindarle muchos años de belleza y servicio. NOTA: Extraiga cuidadosamente el artefacto y las piezas. Verifique que contenga todas las partes requeridas (consulte la figura 1) antes de descartar los materiales de empaque. GARANTÍA LIMITADA ADVERTENCIA: UNA DESCARGA ELÉCTRICA PODRÍA CAUSAR LESIONES.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 9 FIGURA 1.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 10 INSTRUCCIONES DE MONTAJE Y CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de descarga eléctrica. 2. Fije la barra de montaje (C) a la caja de embutir (D) con los tornillos correspondientes (E) (no incluidos) (vea la Fig. 1). 3.
12 pg_W-272_EFS 5/14/06 3:42 PM Page 11 FIGURE 2. GROUP A: CONNECT TO BLACK HOUSE WIRE GROUP B: CONNECT TO WHITE HOUSE WIRE BLACK WHITE WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER BROWN, GOLD OR BLACK WITHOUT TRACER BROWN, GOLD OR BLACK WITH TRACER NOTE: When parallel wire (SPT I & SPT II) is used; the neutral wire is square shaped and ridged, and the hot wire will be round in shape and smooth. (See below.
pg_W-272_EFS 5/14/06 3:42 PM Page 12 CLEANING AND CARE To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Extend-A-Finish Laquer Conditioner, recommended once a year to clean, condition, and protect fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.
