Installation Instructions

Page 2/2
Fig.3
C
US
1:There have LED module in the lamp arm (I)with this
fixture ,if it does no work ,it is need to replace the
complete lamp arm (I) with module together .Make sure
the power if off before you replace
2:Twist-off the screw (G) and disconnect the wires and
save the wire nuts , take the fixture down from the wall
carefully;
3:Twist-off the screw (H) with screw driver .Save these
parts for subsequent service.
5:Pull-out the wire with arm together from the hole of the
body,replace a new lamp arm(I);
6:Repeat 5-1 to assembly the fixture
Your replace is now complete , return power to the
junction box and text the fixture
LED module replace(Fig.3)
Shut
off power before replacing
G
I
H

WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
AVERTISSEMENT!COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEU

READ AND SAVE THESE INSTRUCTIONS
For LED Wall
INSTALLATION INSTRUCTIONS

