Installation Instructions

Page 2/2

Fig.3

1:There have one LED module in the lamp arm (I)with

this fixture ,if it do not work ,replace the

complete lamp arm (I) with module together .Make sure

the power if off before you replace

2:Twist-off the screw (G) and disconnect the wires and

save the wire nuts , take the fixture down from the

wall carefully;

3:Twist-off the screw (J) with screw driver ,separate the

lamp body ;Save these parts for subsequent service.

5:Pull-out the wire from the hole of the face plate (K),

replace a new lamp arm(I);

6:Repeat 5-1 to assembly the fixture

Your replace is now complete , return power to the

junction box and text the fixture

LED module replace(Fig.3)

Shut

off power before replacing



WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

AVERTISSEMENT!COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEU

READ AND SAVE THESE INSTRUCTIONS

For LED Wall

INSTALLATION INSTRUCTIONS