Installation & Assembly

Back Legs ×2

Chair Body ×1

Front Legs

×2

Bolt M8×100mm ×8

Spring Washer M8 ×8

Flat Washer M8 ×8

LEISURE CHAIR

Adjustable Glide

(Remarks: 2 pcs for backup use only)

and then follow the simple step-by-step

f reach of children.

CHAIR

is chair, we recommend

PAGE 1
CHAIR LEISURE CHAIR and then follow the simple step-by-step is chair, we recommend f reach of children.
PAGE 2
CHAIR STEP1: Please open the Velcro on the bottom of Chair Body (3) and take the legs and hardware from package on the bottom of Chair Body (3). There are numbers shown on legs and each corner of the bottom of Chair body (3). Please match them correctly. Attention the label '' Insert bolt from this side'' on the legs and insert the legs at correct side.
PAGE 3
CHAIR STEP3: Please adjust the Adjustable Glide (E) on the bottom of the Back Legs (2) and balance the chair for uneven floor. E STEP4: Fully tighten all Bolts (A) with Allen Wrench (D). Recover the Velcro on the bottom of Chair Body (3). Carefully turn over the chair . Assembly is completed.