InstallationandAssembly

1) Prepare 4 bolts assembly by inserting washer (#C) onto
bolts (#B). Insert bolts (#B) to headboard (#1) 75% in, then
hook side rails (#3) to the bolts (#B) on headboard (#1).
Secure by inserting washer (#C) and wing nut (#D) from the
back of the headboard (#1) onto bolts (#B).
2) Align footboard (#2) to the bottom holes of the side
rails (#3). Insert bolts (#B) from footboard (#2) to side
rails (#3), then secure by inserting washer (#C) and
wing nut (#D) from the other end of the bolts (#B).
Align slat support legs (#6) to the holes of
the slats (#4,5). Secure by using bolts (#A).