Installation & Assembly

PAGE 1
The fixture is designed 1o dint with a standard Due to the inrush current wattage should not exceed 150 watts of product foc a 600 watt dimmer, 'WARNING: Wires need to be connected to driver found in canopy and should not be connected directly to power source or a short may occur LED 1x4.
PAGE 2
IMPORTANT: Tum OFF the power at the main fug or circuit breaker box before starting installation 1) = = Step.1; Remove mounting bracket (A) from back plate (C) end install to electrical box. Step.2: Wire fixture to wires in outlet box. Make sure connections are made in accordance with NEC. Install the fixture (C) to the ‘mounting bracket (A) using screws (D) to secure. 3.) Step.3: Place bubble glass sphere (F) into cup and secure using ring (G). Cleaning & Care: Clean with soft cloth and a mild detergent.