Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
(A)
Mounting Bracket
(F)
Finial
(C)
Anchors
(E)
Step.1:
1.)
Wire fixture to wires (E) in outlet
box. Copper wire is for Ground.
2.)
Adjust wire length to desired mounting
height, and tighten strain relief screws
to secure. Install fixture to bracket and
tighten screws (F) at the ends of the
canopy to secure.
3.)
Remove mounting bracket from
fixture and install to electrical box
using screws (D). Mark where screws
at ends of bracket (A) meet the
ceiling. Remove mounting bracket (A)
from ceiling. Drill holes using 3/16"±
drill bit where marked. Install
mounting bracket (A) to outlet box by
attaching anchors (C) and screw nuts
(B) to secure bracket at ends.
(B)
(D)
(A)
(C)
(F)
(B)
(D)
(E)
(A)
(C)
(F)