Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (2)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
(A)
Mounting Bracket
(F)
Finial
(C)
Anchors
(E)
Step.1:
1.)
Wire fixture to wires in outlet box.
Green/Copper wire is for Ground.
2.)
Adjust wire length to desired mounting
height using push pin strain relief.
Install fixture to bracket and tighten
finials (F) on the canopy to secure.
3.)
Remove mounting bracket(A)from
fixture and install to electrical
box.Mark where anchors(C) at ends of
bracket meet the ceiling.Remove
mounting bracket from ceiling.Drill
holes using 3/16"± drill bit where
marked.Install mounting bracket(A) to
outlet box and attach anchors(C) to
secure bracket at ends.
(B)
(D)
(A)
(C)
(B)
(D)
(E)
(A)
(C)
(F)
(F)