Installation & Assembly

IMPORTANT: Turn off the power at the main fuse or circuit breaker box before starting installation
Locate all hardware & components before discarding packaging
Cleaning & Care:
Page 2 of (3)
Clean with soft cloth and a mild detergent.
Do not use abrasive cleaner.
(A)
Mounting Bracket
(C)
Finial
(E)
(A)
(B)
(C)
(D)
(E)
(B)
Step.1:
1.)
Step.2: Wire fixture to wires (B) in outlet box.
Copper wire is for Ground.
2.)
Step.3: Attach center stem (D) to the fixture.
Adjust wire length to desired mounting
height, and tighten strain relief screws
to secure. Install fixture to bracket and
tighten ball nuts (F) on the canopy to
secure.
3.)
Remove mounting bracket (A) from
fixture and install to electrical box.
(C)
(A)
Step.4: Thread acrylic diffuser (E) to the
candle base.
4.)
(E)