Installation & Assembly_1

Package Contents
Pleasegoto forproductcleaningtips.Gotothe selection.
LED.
www.quoizel.com Care+Maintenance
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
LightSource:
EstimatedAssemblyTime:
Preparation:
Integrated31W
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
Warnings and Cautions
Assembly Instruction Sheet #IS-PCEB8524C
For Style PCEB8524C
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
B
Mounting Screw
x2
Crossbar
x1
STEP 1 - Installing the Crossbar
A. Pass the supply wires and ground wire through the Crossbar (A).
Attach the Crossbar (A) to the Outlet Box and secure with Outlet
Box Screws (not included). Tighten until snug.
A
Fixture Body
x1
C
Figure 1
STEP 3 - Install the Fixture Body
A. Position the backplate and Fixture
Body (C) onto the Crossbar (A). Align
holes on the backplate to the mounting
holes on the ends of the Crossbar (A).
Secure the Fixture Body by using the
mounting Screws (B) and hand tighten
until snug with screwdrivers.
Your fixture is now assembled and
ready to use. Enjoy!
Figure 3
C
A
Outlet Box
Outlet Box Screw
(not supplied)
Supply Wires and
Ground Wire
B
A
1of2
2016 QuoizelInc.
White wire
from supply
White wire
from fixture
Black wire from
supply (or Red)
Black wire
from fixture
Ground wire
from supply
Ground wire
from fixture
Figure 2
STEP 2 - Wire Connections
A. Use standard wire connectors (not included) to make all the wire
connections. Twist the connectors until the wires are tightly joined
together. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Outlet Box.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2016-10-12
Replace Shade
A. Turn power OFF and then remove fixture from wall outlet box.
Unscrew screws from one end of the fixture body with screwdrivers
and remove the end cap.
Screw
End Cap
Fixture Body
A. Slip the old shade off the fixture body and slip the replacement
shade into the fixture body.
B. Place previously removed end cap back onto the end of the fixture
and secure with the removed screw. Tighten until snug with
screwdrivers.
Screw
End Cap
Shade
Fixture Body
Repeat the same process to replace another shade if necessary.
Refer to Step 1 - Step 3 to install the fixture back onto the wall outlet
box.