Installation Manual

1. Attach the metal bracket to the nWGT unit using two M4-20 screws (see Figure B-2):
Figure B-2 - Bracket Attached for Installation for Top Mounting
2. Secure the bracket to the dispenser using two M4-20 screws (see Figure B-3):
Figure B-3 - Top-Mounted nWGT with Bracket Secured to Dispenser
3. Connect the unit to power supply
4. Connect the unit to the dispenser heads and/or peripherals
B.3.1. Cable Gland and Conduit Installation
When mounting the nWGT on top of a dispenser, insert a cable gland in the hole drilled into the
dispenser for the cables (see Figure B-4) and use a PG Flex Tube protective conduit to cover the cable
bundle. This protects the internal components in the dispenser from water damage and other external
factors.
nWGT Installation Manual 31