Installation Manual

ManualsBrandsOrpak Systems ManualsElectronicsnWGT-W Outdoor unit w/p.s., nWGT-W Outdoor unit w/o p.s, nWGT-W (Pump, SAMx1, LAN)

Table Of Contents

1. Affix the nWGT to a smooth surface (see Figure A-1):

Figure A-1 - nWGT Unit Inside Dispenser

2. Connect a 15-32 VDC (stabilized), 1000 mA (maximum) AC adaptor to the nWGT

3. For the master nWGT, connect a shielded S-CAT5E cable using a RJ-45 connector, or connect an

RS-485 cable to the RS-485 connector

4. Activate the main power source – 110-240 VAC

5. Close the dispenser head cover

28 nWGT Installation Manual