Installation Manual
Table Of Contents
1. Connect the harness to the required connector (see Figure 4-8):
Figure 4-8 - Bracket Attached for Wall-Mounting
2. Secure the bracket to the wall using two M4-20 screws, flat washers, and dibbles (see Figure 4-9):
Figure 4-9 - Wall-Mounted nWGT with Bracket Secured to Wall
3. Connect the unit to power supply
4. Connect the unit to the dispenser heads and/or peripherals
The completed nWGT solid wall-mounted installation appears as follows (see Figure 4-10, Figure 4-11):
24 nWGT Installation Manual