User's Manual

4 µDP Installation Manual
1. SCOPE
This document describes the the mechanical installation of Orpak's µDataPass, part of the
FuelOmat Gold Wireless Vehicle Identification System.
2. GENERAL DESCRIPTION
The µDataPass (see Figure 1) unit collects accurate data from the vehicle on-board
computer bus (OBDII) and transmits it to Orpak's Wireless Gateway Terminals (WGT)
while refueling, or whenever the vehicle passes next to the WGT installed at the fleet
facilities.
µDP implements OBDII-CAN, KLINE and M-OBD while reading vehicle bus
µDP implements IEEE802.15.4 for transmitting vehicle data to WGT
Wireless IEEE802.15.4 uses the ISM 2.4GHz global license free band
The unit is powered by vehicle battery.
Figure 1 – µDP, General View
3. AVAILABLE CONFIGURATIONS
(See Table 1)
Table 1. Available Configurations
Unit
P/N
µDataPass
800907450
µDataPass Plus
800907451