User's Manual

Table Of Contents

FCC Compliance Statement for DataPass/µDataPass 2

µDataPass – a connector shaped unit that plugs into the vehicle On Board

Diagnostics connector (OBD II) and intended for light and commercial vehicles which

has OBD II connector. The following µDataPass types are available:

 µDataPass CAN, P/N 800907435

 µDataPass K-Line, P/N 800907436

 µDataPass Plus CAN, P/N 800907430

 µDataPass Plus K-Line, P/N 800907431

DataPass - connected directly to the vehicle bus harness, used in heavy and light

vehicles and supports most common bus protocols.

The following DataPass types are available:

 DataPass Heavy, P/N 800907340

 DataPass Light, P/N 800907330

 DataPass Plus Heavy, P/N 800907310

 DataPass Plus Light, P/N 800907300

 DataPass AVL Heavy, P/N 800907540

 DataPass AVL Light, P/N 800907541

Please check the manufacturer

specifications for the proper protocol

supported by the Vehicles in your

fleet!

The DataPass is installed using the provided DataPass harness. The harness is

installed inside the driver cabin, behind the dashboard and connects to the vehicle's

diagnostics connector in light vehicles, or to the diagnostics plug rear wiring in heavy

vehicles.

3. DATAPASS – TECHNICAL SPECIFICATION

Table 1 lists the specifications for the DataPass units.

Table 1. DataPass Specifications

Parameter

Value

Physical

HxWxD

15x70x21 mm

Weight

45g

Connectors

562810 Molex

Electrical

Supply voltage

Normal operation: 12VDC (Nominal)

Minimum: 10 VDC