Installation Manual

Section 1 Introduction
1.1. General
This manual provides instructions on how to install and configure the TR500, Orpak's flexible and cost-
effective outdoor payment and authorization terminal.
1.2. Solution Description
TR500 is part of Orpak's next generation of outdoor authorization tag reader, installed directly onto the
dispenser or wall mounted next to it for both attended and unattended activities. The tag reader
supports authorization via contactless MiFare cards & tags as well as 125KHz tags.
The TR500 is a compact standalone reader unit for tags intended for vehicle or driver tag identification in
gas stations and other applications. The TR500 includes a Security Application Module (SAM) used to
handle encrypted tags. The TR500 is installed within easy reach for customers wishing to refuel, and it
transmits information to the station automation system over an Ethernet or RS-485 cable.
1.3. Documentation Conventions
This manual uses the following conventions:
Warning notes contain information that, unless strictly observed, could result in injury or
loss of life.
Caution notes contain information that, unless strictly observed, could result in damage or
destruction of the equipment or long-term health hazards to personnel.
Notes contain helpful comments or references to material not covered in the manual.
Best practice notes contain helpful suggestions.
Example notes contain additional information to illustrate a concept/procedure.
8 TR500 Installation and Setup Manual