Buttons guide

SYSTEM & bluetooth

Start

Shutdown

Baery level - (sound nocaon % of baery)

Switch language - (English-French)

ght press 0,2s

2x short press

long press

Turn device in pairing mode

Reset bluetooth

long press

ght press 0,2s

1 . Command buttons

BUTTONS

AND LEDS LIGHTS

FULL

DESCRIPTION

power ON/OFF buon

Acve Noise Cancelling slider

boom-microphone mute buon

buon

plus buon

play/pause buon

minus buon

PAGE 1
FULL DESCRIPTION BUTTONS AND LEDS LIGHTS 1 .
PAGE 2
Surrounding management Activate/deactivate ANC mode - «Active noise cancelling mode» push ↕ short press Noise Reduction Maximum noise-reduction - Put ANC to maximum level press down and maintain ↓ Adjusted noise reduction - Increases ANC level step by step press down ↓ and fast release Aware Maximum awareness - Put ANC to minimum level lift and maintain ↑ Adjusted awareness - Decreases ANC level step by step lift ↑ and fast release Aware + Enter/Exit “Face-to-face conversation” - Only if no active
PAGE 3
media management Music Play/pause music short press Next track long press Previous track long press Volume Volume increases by 1 step short press Volume decreases by 1 step short press Vocal command long press Activate Apple Siri or Google Assistant manual update mode Boot in update mode ↕ push + power-on Reboot device after update mode short press 2.
PAGE 4
power led light blinking SYSTEM : Device is booting steady BATTERY : Strong battery - Device ON slow blinking BATTERY : Charging complete - Device OFF & USB-C plugged steady BATTERY : Moderate battery < 35% - Device ON slow blinking BATTERY : Charging ongoing - Device OFF & USB-C plugged BATTERY : Low battery < 10%, needs charging - Device ON steady blinking SYSTEM : Device shutdown blinking (3 minutes) BLUETOOTH : Device shutdown steady ( 3 seconds) BLUETOOTH : Pairing success steady UPDAT