User Manual

ManualsBrandsOrolia ManualsElectronicsSafeLink Distress Beacon

Table Of Contents

1. INTRODUCTION
- 1.1. Présentation du système COSPAS-SARSAT
- 1.2. Déclenchement de l’alerte et calcul de la position
2. PRESENTATION
- 2.1. Description du conteneur et du support mural
- 2.2. Description de la balise
3. INSTRUCTIONS DE TESTS
4. UTILISATION
- 4.1. Activation automatique
- 4.2. Activation manuelle
5. FAUSSES ALARMES
- 5.1. Prévention des fausses alarmes
- 5.2. Désactivation de la balise
6. INSTALLATION DE LA BALISE
- 6.1. Montage de la plaquette d’instructions
- 6.2. SafeLink Auto Catégorie 1 (Pont)
  - 6.2.1. Installation du conteneur
  - 6.2.2. Installation de la balise dans le conteneur
- 6.3. SafeLink Manual+ catégorie 2 (Survie)
  - 6.3.1. Installation du support
  - 6.3.2. Installation de la balise dans le support
7. SPECIFICATIONS TECHNIQUES
8. DECLARATION D'ENREGISTREMENT
- 8.1. Général
- 8.2. Enregistrement au Canada
- 8.3. Licence radio au Canada
9. MAINTENANCE
10. REMPLACEMENT DES PILES
- 10.1. Démontage du pack piles
- 10.2. Remontage du pack piles
11. REMPLACEMENT DU LARGUEUR HYDROSTATIQUE
- 11.1. Description
- 11.2. Remplacement
1. INTRODUCTION
- 1.1. COSPAS-SARSAT system description
- 1.2. Immediate alerting and location calculation
2. DESCRIPTION
- 2.1. Container and mounting bracket description
- 2.2. Beacon description
3. TEST INSTRUCTIONS
4. INSTRUCTIONS FOR USE
- 4.1. Automatic activation
- 4.2. Manual activation
5. FALSE ALARMS
- 5.1. False alarms prevention
- 5.2. Beacon de-activation
6. BEACON INSTALLATION
- 6.1. Mounting instructions plate
- 6.2. SafeLink Auto Category 1 (Float Free)
  - 6.2.1. Installation of container
  - 6.2.2. Installation of beacon into container
- 6.3. SafeLink Manual+ category 2
  - 6.3.1. Mounting bracket installation
  - 6.3.2. Installation of beacon into its mounting bracket
7. TECHNICAL SPECIFICATIONS
8. REGISTRATION
- 8.1. Importance of accurate registration
- 8.2. Registering in USA
- 8.3. Radio License in USA
- 8.4. Registering in Canada
- 8.5. Radio License in Canada
9. MAINTENANCE POLICY
10. BATTERY REPLACEMENT
- 10.1. Battery pack removal
- 10.2. Battery pack reassembly
11. AUTOMATIC RELEASE SYSTEM REPLACEMENT
- 11.1. Description
- 11.2. Replacement

DOC09028A

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS LANG7 LANG8 LANG9 LANG10 LANG11 LANG12

6.3. SafeLink Manual+ category 2

Note: the mounting bracket is fitted with a magnet to avoid beacon activation (water, moisture) when installed in its

mounting bracket.

6.3.1. Mounting bracket installation

The mounting bracket should be installed in a clear area, well known and identified so that it can be reached easily

for emergency used. It should be strongly fixed onto a vertical surface with 3 screws according to drilling mask

hereunder.

Note: dimensions are in millimeters (inches in bracket).

Reminder: The instructions plate must be fixed close to the mounting bracket.