User Manual

ManualsBrandsOrolia ManualsElectronicsSafeLink Distress Beacon

Table Of Contents

1. INTRODUCTION
- 1.1. Présentation du système COSPAS-SARSAT
- 1.2. Déclenchement de l’alerte et calcul de la position
2. PRESENTATION
- 2.1. Description du conteneur et du support mural
- 2.2. Description de la balise
3. INSTRUCTIONS DE TESTS
4. UTILISATION
- 4.1. Activation automatique
- 4.2. Activation manuelle
5. FAUSSES ALARMES
- 5.1. Prévention des fausses alarmes
- 5.2. Désactivation de la balise
6. INSTALLATION DE LA BALISE
- 6.1. Montage de la plaquette d’instructions
- 6.2. SafeLink Auto Catégorie 1 (Pont)
  - 6.2.1. Installation du conteneur
  - 6.2.2. Installation de la balise dans le conteneur
- 6.3. SafeLink Manual+ catégorie 2 (Survie)
  - 6.3.1. Installation du support
  - 6.3.2. Installation de la balise dans le support
7. SPECIFICATIONS TECHNIQUES
8. DECLARATION D'ENREGISTREMENT
- 8.1. Général
- 8.2. Enregistrement au Canada
- 8.3. Licence radio au Canada
9. MAINTENANCE
10. REMPLACEMENT DES PILES
- 10.1. Démontage du pack piles
- 10.2. Remontage du pack piles
11. REMPLACEMENT DU LARGUEUR HYDROSTATIQUE
- 11.1. Description
- 11.2. Remplacement
1. INTRODUCTION
- 1.1. COSPAS-SARSAT system description
- 1.2. Immediate alerting and location calculation
2. DESCRIPTION
- 2.1. Container and mounting bracket description
- 2.2. Beacon description
3. TEST INSTRUCTIONS
4. INSTRUCTIONS FOR USE
- 4.1. Automatic activation
- 4.2. Manual activation
5. FALSE ALARMS
- 5.1. False alarms prevention
- 5.2. Beacon de-activation
6. BEACON INSTALLATION
- 6.1. Mounting instructions plate
- 6.2. SafeLink Auto Category 1 (Float Free)
  - 6.2.1. Installation of container
  - 6.2.2. Installation of beacon into container
- 6.3. SafeLink Manual+ category 2
  - 6.3.1. Mounting bracket installation
  - 6.3.2. Installation of beacon into its mounting bracket
7. TECHNICAL SPECIFICATIONS
8. REGISTRATION
- 8.1. Importance of accurate registration
- 8.2. Registering in USA
- 8.3. Radio License in USA
- 8.4. Registering in Canada
- 8.5. Radio License in Canada
9. MAINTENANCE POLICY
10. BATTERY REPLACEMENT
- 10.1. Battery pack removal
- 10.2. Battery pack reassembly
11. AUTOMATIC RELEASE SYSTEM REPLACEMENT
- 11.1. Description
- 11.2. Replacement

DOC09028A

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS LANG7 LANG8 LANG9 LANG10 LANG11 LANG12

6. BEACON INSTALLATION

6.1. Mounting instructions plate

The SafeLink beacons are supplied with an instructions plate. This is a rigid plate with basic visual instructions for

how to operate the beacon in an emergency.

The instruction plate should be mounted next to the beacon so that it is easily visible in an emergency. Use four

screws (not supplied) to mount the plate.

Important: do not paint the plate; do not use strong degreasing solvent to clean it.