User's Guide

3
HOW TO OPERATE YOUR ICS NAV5PLUS
Initial Operation
Switch on the ICS NAV5plus by pressing the power button
The LCD display backlight will come on.
The LCD data display will show :
The “V2.07” is the software version, which may vary.
A short self-test is performed, then the ICS NAV5plus is ready to receive
NAVTEX messages.
The factory default setting is for all NAVTEX stations and message
categories to be printed.
To change the settings, refer to the SETUP section.
ICS NAV-5 V2.07
LOG EMPTY