User's Guide

27
Default Reset
Use the Default Reset to reset the ICS NAV5plus to the factory default
settings. This sets all NAVTEX stations and message categories to on.
• Turn the unit off
• Hold down the alarm silence button while pushing the
power button
• The ICS NAV5plus will sound a bleep, and load default settings
Self Test
Run the ICS NAV5plus self test, refer to ‘self test’ section for details.
Should any item on the self test fail, turn the ICS NAV5plus off and on again
and repeat the system self test. Should any item on the self test list fail a
second time, contact your supplier for advice or call the McMurdo Technical
Help Line for assistance.
Tel [phone]
Fax [phone]
Email: [e-mail]