User's Guide

Antenna connection

Pass the cable though the black plastic boot and prepare the end of the

cable as shown in the diagram, folding the cable braid back and screwing

the PL259 connector firmly in place. To ensure a good connection it is

recommended that the centre pin is soldered.

Screw firmly in place

Solder centre pin connection

Side pin (2)

Centre pin (1)

NAV-CABLE assembly detail

ICS NAV5plus connection

If required, the NAV-CABLE may be extended with 50 ohm coaxial cable

and connectors. The maximum cable length should not exceed 100m.

Ensure that any cable joints are well secured and waterproofed using self-

amalgamating (rubber) tape.