User's Guide

11
TEARING OFF A PRINTOUT
Use a gentle up or downward and sideways motion to tear the paper at the
exit point of the ICS NAV5plus case.
Warning: DO NOT PULL THE PAPER THROUGH THE PRINTER AS
THIS ACTION MAY DAMAGE THE PRINTER MECHANISM
Always use the paper feed button to feed the paper clear of the
mechanism.
PAPER LOADING
The ICS NAV5plus is supplied with one roll of paper fitted. At the end of this
paper roll the ICS NAV5plus will sound an alarm and printing will stop.
Early warning that the paper is about to run out is given by red stripes on
the paper.
Should the paper run out in the middle of a message, information will not be
lost provided that the ICS NAV5plus is not switched off whilst the paper roll
is replaced.
Ensure that proper anti-static procedures are applied when installing or
servicing the ICS NAV5plus and also when replacing the paper roll. Take
care to discharge any static that you may be carrying by touching exposed
metalwork on the case prior to replacing the paper roll.
• To remove the remaining paper, open the paper loading door. Push a
top corner of the door to release the locking door catch
• Tear off the paper where it enters the printer mechanism
• Remove the old paper roll
• Remove the plastic spindle from inside the paper roll
• Press the paper feed button to feed the remaining paper through
the printer mechanism
Warning: DO NOT PULL THE PAPER THROUGH THE PRINTER AS
THIS ACTION MAY DAMAGE THE PRINTER MECHANISM