User's Manual Part 1

Hole size

to fit #10 screw:

3.5mm

Trunnion mounting the display

The standard bulkhead mounting U-Bracket can be used to mount the NAV-7 above

or below a horizontal (or near horizontal) surface.

Drilling drawing (mm)

Select hole size to suit method of fixing mountings

– clear or tapped holes.

Rear view of trunnion bracket assembly

Ensure that rubber washers are fitted

between the trunnion bracket and the

plastic enclosure.

Tilt the display to the correct viewing angle.

Tighten the two thumbwheels.