Operation Manual

36 89-042 Issue 5
4.6 IMO Number
The assigned ship’s IMO number has to be entered.
4.7 RAIM Present
(Automatically selected)
The station will automatically check for RAIM presence in working mode – by $--
GBS sentences on Sens1, Sens2 or Sens3 inputs. The operator can manually
override the automatic selection by highlighting the RAIM line and selecting
Change. In normal circumstances this function is not used.
4.8 Setup System Password
For safety reasons some data is protected by a system password (maximum 8
characters). When the system is initially switched on, no password exists. Pressing
OK allows the user to enter the desired password. We strongly recommend that
during commissioning a password is entered to prevent the transmitted data from
being erased or amended either accidentally or maliciously. A record of this
password must be kept in a safe location as only authorised service personnel can
by-pass this system password.