Installation Manual

S1-2 89-041 Section 1 Issue 4
UAIS building blocks
VDU Transponder/display system 89-001-001
Transponder Only 89-051-001
VDU Display Only 89-052-001
GPS antenna assembly 89-021-001
Transponder 89-051-001
Transponder unit, packed with accessories:
2off PL 239 male plug for VHF antenna interface
2off TNC male for GNSS antenna interface
4off M6 x 40mm machine screws for bulkhead mounting
Installation manual
Optional: The Transponder unit can be delivered with a combined GLONAS/GPS receiver
VDU Display system (MKD) 89-052-001
Display unit, packed with accessories:
15 pin D-sub connector
Trunnion Mounting Bracket
4off No10 x 25mm self-tapping screws for mounting Trunnion Bracket
Flush mounting kit, including seal
Cutting template for flush mounting
Operation manual
GPS antenna assembly 89-021-001
GPS antenna unit, packed with accessories:
Mounting pole and mounting plate
2 off ‘U’-bolts for mounting pole and plate
Options
MT-1 Transponder 89-051-001
MT-1 VDU 89-052-001
MT-1 GPS antenna 89-021-001
VHF Antenna 89-020-001
S/S Stand-off bracket for VHF antenna 903-01
S/S Stand-off/Bulkhead bracket for VHF antenna 903-02
GPS Antenna Adapter 89-362
Gyro interface unit 89-028
AC/DC converter 89-029
Installation kit 89-038
Installation kit consists of:
2mm 2 core flex power cable 20m
RG214 Coax VHF antenna cable 30m
RG58 Coax GPS antenna cable 30m
0.5mm 4-twisted pair signal cable 60m
Cable tie 200
Cable marker 20
Crimp tool 1
Self amalgamating tape 2