Operation Manual

89-042 Issue 5 47
5 Maintenance and Servicing
5.1 Preventative Maintenance
The UAIS transponder system is an essential part of the ship’s navigation system
and is a vital component for the safety of the ship and its crew. It is therefore very
important to maintain the system and its installation to a very high standard. The
design of the UAIS transponder ensures that maintenance can be kept to a
minimum, however it is good practice to perform a performance check at least once
every week.
5.2 VDU Touch-Screen
To optimise performance of the touch-screen VDU and cabinet, ensure they are
kept clean and grease-free. Use a clean damp cloth, or for heavier deposits use a
clean, damp cloth and a mild solution of dish washing detergent and water. Do not
use any spirit or alcohol based solvents, gasoline or oils.
5.3 Electrical Connections
Periodically check the electrical connections; ensure that no cables are frayed or
worn, and that all connections are tight and sound.
5.4 Repair and Service
With the exception of the fuses located on the Screw Terminal Board, there are no
user serviceable parts. Changing fuses is described in Section 6 – Troubleshooting.
Removal of the inspection plates other than by an Authorised Service Technician
will void warranty. If having followed the Troubleshooting Guide (Section 6) UAIS is
still inoperable, please call your local Service Centre.
5.5 Spare Parts
Use only manufacturers genuine spare parts. No liability can be accepted for
equipment failure due to incorrect replacement parts being used.
5.6 World-wide Sales and Service
For a complete list of worldwide sales and service agents, please contact your
product supplier.