Operation Manual

46 Issue 1 M-2 AIS Operation

Troubleshooting

Transponder status indicators

Remove the transponder dust cover to view status of indicator lamps (LED).

Rx LED ON continuously System fault

Rx LED OFF continuously Check antenna connection

Check for targets in range

System fault

Tx LED ON continuously System fault

Tx LED OFF continuously Check for “No own reports” setting

(silent mode)

System fault

OK LED ON continuously System healthy

OK LED OFF continuously Check error code on Display

PWR LED ON continuously System healthy

PWR LED OFF continuously Check fuse

Check ship’s supply

System fault

For all system faults, contact the nearest Service Centre.

red LED flashes when a signal is received

Tx red LED flashes when transmitter is active

OK LED on when BITE remote alarm relay is deactivated (no alarm

active)

PWR LED on whenever power is applied and the system fuse is

good.