Operation Manual

40 Issue 1 M-2 AIS Operation

Setup Mode: Channel Regions

Option Setting Notes

Entry 0 - 8 LATtitude (SW)

LONgitude (SW)

LATtitude (NE)

LONgitude (NE)

Enter the coordinates of

South West box corner

then North East box

corner.

Transition Zone 1 - 8 Select ID number for

zone

Chan A 1 - 2261 Set channel number *

Chan B 1 - 2261 Set channel number *

Mode Tx A/B, Rx A/B

Tx A, Rx A/B

Tx B, Rx A/B

Rx A/B, only

Rx A only

Rx B only

Select appropriate

Transmitter and Receiver

response for AIS region

Power High

Low

Select appropriate

Transmitter output for

AIS region

Source VDL addressed Region information

automatically received

over the AIS data

channel

In Use Yes

Activate region

*Refer to ITU R M 1084-4.

Not all channel numbers are valid. UP/DOWN scrolls through valid numbers

only.

Zone “0” always indicates the “High Seas” region which has no defined

geographical coordinates. Zone “0” cannot be edited.