Operation Manual

Safety Summary
WARNING: ENSURE THAT THE M-2 AIS HAS BEEN CORRECTLY
INSTALLED IN ACCORDANCE WITH IMO GUIDELINES AND THE
SUPPLIED INSTALLATION MANUAL BEFORE POWERING ON THE
SYSTEM.
WARNING: The M-2 has no ON/OFF or power switch. It will automatically start
operation within 2 minutes of applying power to the transponder unit.
WARNING: Transponder chassis can become hot during extended periods of
operation. Avoid touching this when the transponder is operating. The plastic
dust cover must be fixed in place before setting the equipment to work.
WARNING: Do not touch the VHF antenna or connecting cable when the
transponder is in operation.
WARNING: Unauthorised opening of the transponder access covers may
invalidate the manufacturer’s warranty.
WARNING: Avoid using chemical solvents to clean the Display or transponder
dust cover as they can damage the casing material.
WARNING: The use and operation of an AIS transponder is legislated and
forms a part of the ship’s mandatory navigation equipment under SOLAS
regulations. It is therefore necessary that the installation is certified
(commissioned) and that certain information has to be available before full
operation of the transponder can take place. The ship’s IMO and MMSI
numbers and other important information must be entered as part of the
installation and commissioning procedure, and before the equipment is used at
sea.
WARNING: This product is sold or provided as merely an aid to navigation. It is
the responsibility of the user to exercise discretion and proper navigational and
seamanship skills.