Operation Manual

M-2 AIS Operation Issue 1 13
Push the ENTER key to confirm the character.
Repeat these actions until the data field is correct.
Close the edit keyboard by selecting DONE and
pushing the ENTER key.
Finally, review all the information s hown on screen. When
correct, save the new information and exit to the main menu
level using the SAVE softkey.
Entering numbers
Select edit mode using the EDIT softkey, The data edit
cursor will appear highlighted on the topmos t data field.
Position the edit cursor over the numeric field to be changed.
The current value will be highlighted.
This example shows the
vessel draught field in
edit mode.
Change the value by pressing LEFT or RIGHT on the navigation pad to increase
or decrease the value displayed.
Once the new value is set, use the UP or DOWN navigation
pad keys to move to the next item, or exit and save the
changes with the SAVE softkey.
To cancel an entry, close the keyboard by selecting DONE and then push the
View key. When the display is cycled back to the original page, the entry will be
unchanged. (In other words, the new entry is only saved by pressing the Save
key. It will still display as long as that view is displayed, but will revert to the
previous data when the view is re-selected.)