Installation Manual

AIS Installation Manual Issue 1 45
10 Pre-Installation Inspection Record
1. Vessel Data (  Tick appropriately )
Vessel Name IMO Number
Flag State MMSI Number
Owner / Company Radio Call Sign
Office: On-Board Contact
Name & Position
Telephone Number(s)
GSM:
Office: Shore-based Contact
Name & Position
Telephone Number(s)
GSM:
Type of Vessel Gross Tonnage gt
L.O.A m Beam m
Comments:
2. Installation (  Tick appropriately )
Ship’s Emergency Power Source & Location
Cable length to Transponder = m
 Optional AC to DC Converter (89-029) Required
 12 V DC  24 V DC  110 V AC  220 V AC
 50 Hz  60 Hz
AIS Transponder Proposed Location
AIS Display Proposed Location
4 Twisted Pair + Drain Cable length to Transponder m
AIS GNSS Antenna Proposed Location
RG58 Cable length to Transponder = m
 Optional Antenna Adapter (89-362) Required
AIS VHF Antenna Proposed Location
RG214 Cable length to Transponder = m
 Optional VHF Antenna (89-020-001) Required
 Optional Antenna Mast Mount (903-01) Required
 Optional Antenna Mast/Bulkhead Mount (903-02) Required
AIS Pilot Plug* Proposed Location
Cable length to Transponder = m
Ship’s Ground Connection Location
Cable length to Transponder = m
Ship’s Alarm Panel Location
Cable length to Transponder = m
* If a Pilot Plug is fitted, a mains power supply for a PC should be made available nearby
 Optional Installation Kit (89-038) Required
Comments: