Installation Instructions

Page 4
Tabletop or ceiling installation
The F1 DSC Radiotelephone can be mounted on top of a table or on the ceiling. The
supplied bracket is used to mount the radio in these positions. The mounting bracket is
supplied with 6 installation screws; it is recommended to use all 6 screws.
(See ‘Drilling guides; on page 9.)
Before the bracket is fixed to the table or the ceiling make sure that there will be
enough room for the radio and the cables. The main dimensions are shown in the
figures below.
When the tabletop bracket is mounted, install the radio and find the angle that will be
most suitable for operating the radio, then tighten the lock knob. When the radio is in
position in the bracket connect the necessary cables, but make sure that enough cable
length is available for future readjustment of the radio.