User's Manual

18
8.3 Mounting instruction plate
The Precision 406 is supplied with an instruction plate. This is a rigid plate with basic
visual instructions for how to operate the Precision 406 in an emergency. The plate
varies slightly depending on whether you have a wall bracket or a full enclosure. The
wall bracket version is illustrated below.
The instruction plate should be mounted next to the EPIRB so that it is easily visible in
an emergency. Use the four self-tapping screws supplied to mount the plate. Mounting
dimensions are shown in the diagram above, or you can use the plate itself at a drilling
guide for the screws.
During vessel maintenance, ensure the plate does not get painted over or cleaned
down with strong degreasing solvents.
VRV
2
1
3
4
5
58.4mm (2.3")
70mm (2.75")
130mm
(5.1")
116.3mm
(4.58")
Mount plate
next to EPIRB