Install Manual

TX302A3 Sensor Specification
SensorʼsSpecification  
Battery  life
8  years  normally  use.
Battery  Voltage
3.0  V
Storage  Temperature
-50℃  to  150  ℃
Operation  Temperature
-40  ℃  to  125  ℃
Operation  Frequency
315MHz
Transmission  Frequency
Transmit  1  signal  each  60  sec.
Pressure  Monitoring  Range
0  ~  800  kPa
Pressure  Reading  Accuracy
 10kPa
Temperature  Monitoring  Range
-50  ℃  to  125  ℃
Temperature  Reading  Accuracy
 4℃
AntennaSpecification
LoopAntenna
Notice : The changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to
the antenna or the device is permitted. Any change to the antenna or the
device could result in the device exceeding the RF exposure requirements and
void user’s authority to operate the device.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED,
INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED
OPERATION.
iM-2B1 Sensor Specification
315MHz/433MHz
5 years normally use