User's Manual

2. Antenna Installation:
Step Operation Process Photographs
a
1.The head of long antenna set should pass through
the antenna holder and be bundled by rope on the
middle place of the real axles. The rest wires of the
antenna should be bundle by rope along the
chassis to below of the dashboard.
2.The head of short antenna set should pass
through the antenna holder and be bundled by
rope on the middle place of the front axles. The
rest wires of the antenna should be bundle by rope
along the chassis to below of the dashboard.
b
The long and short antenna set should be
connected on both left and right side of T type SMA
connector.
c
The transmission wire should be connected to the
middle of T type SMA connector.