User's Manual

3. Faulty fuse inside the display
device.
Request for a new display from
the distributor and re set the
system using Mode 1 in order
to change the ID, return the
failed display to the
manufacturer.
2. Abnormal display
number or light.
Failure on the Display. Request for a new display from
the distributor and re set the
system using Mode 1 in order
to change the ID, return the
failed display to the
manufacturer.
3. Display not
receiving any signal
from the sensor but
shows E2 after
connecting the
power
Failure on the receiver layout of the
Display.
Request for a new display from
the distributor and re set the
system using Mode 1 in order
to change the ID, return the
failed display to the
manufacturer.
4. Display is not
receiving any signal
on 2 or more 3 tires
from the sensor but
shows E2 with it’s
position after
connect the power
1. Incorrect ID setting on the tire. Request for a new display from
the distributor and re set the
system using Mode 2 in order
to change the ID, return the
failed display to the
manufacturer.
2. Failure on the tire sensor Request for a new sensor from
the distributor and re set the
system using Mode 2 in order
to change the ID, return the
failed display to the
manufacturer.
5. No response on
the MODE and SET
button.
Faulty display. Request for a new display from
the distributor and re set the
system using Mode 1 in order
to change the ID, return the
failed display to the
manufacturer.
6. Pressure (or
Temperature) shows
1. Tire on the wrong position. Ask the Tire Shop to place the
tires in the correct position.