User's Manual

4. The system has been installed by non-authorized distributor or technician from ORO.
5. When the user is not using the original manufacturer’s accessories (eg: Power code) thus
causing the system to fail, this is NOT included ORO warranty policy.
6. Any natural catastrophe/bad installation or any re-modelling process without authorization by
the manufacturer or any un-natural installation are NOT included ORO warranty policy.
7. Consumables which should be replaced on time.
Caution:
The range of warranty are not including the “Aluminum Valves” and “ Nylok screws”, the user
should change the “Aluminum Valves” and “Nylok screws” when is changing the tire sensor.
Attention:
Any user self repairing or modifying the system included the device are NOT protected under the
warranty policy.
Any other question which related to the warranty policy, please feel free to contact with your nearest
authorized distributor or contact directly to us by [e-mail]
Others related ORO TPMS latest and updated news, please go visit: www.oro-technology.com
ORO Technology thanks for your using ORO TPMS and wish you have a safely drive always.
Annexes
bar Tire pressure unit, 1 bar=0.1N/mm
2
psi Tire pressure unit, 1 psi=0.0689 bar.
kPa Tire pressure unit, 1kPa=0.01 bar
℃ Temperature unit, Centigrade = (Fahrenheit-32)x5/9
℉ Fahrenheit
TR01 Failure - Self Eliminate Manual
Failure
Phenomenon
Possible Cause Troubleshooting Steps
1. No Response after
connecting to the
power
1.Plug between the display and
power cable may be loosed.
Re-plug correctly between
display and USB port.
2. Faulty power cable. Request for an exchange from
the distributor and return the
failure cable to the distributor.