User's Manual

Fig. 1
Mode 3 ：Spare Tire Sensor Rotation
The monitor will display No. 3 in blue which means the system is in Mode 3.
Choose a tire to be replaced with spare tire starting from No.1 Tire -> No.2 Tire -> No.3 Tire ->
No.4 Tire -> No.5 Tire -> No.6 Tire -> No.7 Tire to complete the setup mode 3 and back to the
normal operating mode.
1. Spare tire and No.1 tire rotation:
The No.1 and No.7 tire symbol will be flashing green on the display. This means the No.1 tire is
ready for the set up as per below, Fig. 1, in the meantime, the user should press the SET button
continuously for 3 sec. until there is a beep sound, which means the user has completed the set
up for No.1 tire rotation. The system will then proceed back to the normal display mode. If there is
no need to set up the No.1 tire sensor, just press the SET button to skip this process. The system
will then proceed to the No.2 tire sensor rotation setup mode as shows on below Fig. 2.
Fig. 1 Fig. 2
2. Spare tire and No.2 tire exchange:
The No.2 and No.7 tire symbol will be flashing green on the display. This means the No.2 tire is
ready for the set up as per below, Fig. 1, in the meantime, the user should press the SET button
continuously for 3 sec. until there is a beep sound, which means the user has completed the set
up for No.2 tire rotation. The system will then proceed back to the normal display mode. If there is
no need to set up the No.2 tire sensor, just press the SET button to skip this process. The system
will then proceed to the No.3 tire sensor rotation setup mode as shows on below Fig. 2.
Fig. 1 Fig. 2